***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sat Nov 23, 2024 1:25 pm


Board index » OLF Doc-U-build

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
Mikeson1510
 Post subject: Tuning machine holes
PostPosted: Thu Apr 21, 2022 6:29 pm 
Offline
Walnut
Walnut

Joined: Wed Apr 20, 2022 4:09 pm
Posts: 8
First name: Michael
Last Name: Bell
City: Ashburton
State: Canterbury
Zip/Postal Code: 7775
Country: New Zealand
Focus: Build
Status: Amateur
Hi there, I'm just a very new builder from NZ and on my second guitar at the moment, I was curious as to what size hole people drill for a Waverly slotted peghead tuning machine? The rollers are 6.32mm but I wasn't sure whether to drill a 6.5mm hole so the rollers still turn easily or drill a 6.3mm hole which would be tight?
Cheers guys
Top
 Profile  
 
Hesh
 Post subject: Re: Tuning machine holes
PostPosted: Fri Apr 22, 2022 3:59 am 
Offline
Old Growth Brazilian Rosewood
Old Growth Brazilian Rosewood
User avatar

Joined: Fri Nov 02, 2007 9:49 am
Posts: 13386
Location: Ann Arbor, Michigan
First name: Hesh
Last Name: Breakstone
City: Ann Arbor
State: Michigan
Country: United States
Status: Professional
Mikeson1510 wrote:
Hi there, I'm just a very new builder from NZ and on my second guitar at the moment, I was curious as to what size hole people drill for a Waverly slotted peghead tuning machine? The rollers are 6.32mm but I wasn't sure whether to drill a 6.5mm hole so the rollers still turn easily or drill a 6.3mm hole which would be tight?
Cheers guys


Hey Michael I don't have an answer but StewMac is legendary for putting excellent detail level specs on their web site. You can always do dummy installs on scrap too trying out the different hole sizes too.

Didn't want your post ignored and I also wanted to welcome you to the OLF!


These users thanked the author Hesh for the post: Mikeson1510 (Mon May 02, 2022 1:33 am)
Top
 Profile  
 
Mikeson1510
 Post subject: Re: Tuning machine holes
PostPosted: Mon May 02, 2022 1:35 am 
Offline
Walnut
Walnut

Joined: Wed Apr 20, 2022 4:09 pm
Posts: 8
First name: Michael
Last Name: Bell
City: Ashburton
State: Canterbury
Zip/Postal Code: 7775
Country: New Zealand
Focus: Build
Status: Amateur
Thank you very much for your help and welcoming me to the site, looks like I am going to be able to learn a lot from here !


These users thanked the author Mikeson1510 for the post: Hesh (Mon May 02, 2022 3:30 am)
Top
 Profile  
 
Mikeson1510
 Post subject: Re: Tuning machine holes
PostPosted: Mon May 02, 2022 2:41 am 
Offline
Walnut
Walnut

Joined: Wed Apr 20, 2022 4:09 pm
Posts: 8
First name: Michael
Last Name: Bell
City: Ashburton
State: Canterbury
Zip/Postal Code: 7775
Country: New Zealand
Focus: Build
Status: Amateur
Hesh wrote:
Mikeson1510 wrote:
Hi there, I'm just a very new builder from NZ and on my second guitar at the moment, I was curious as to what size hole people drill for a Waverly slotted peghead tuning machine? The rollers are 6.32mm but I wasn't sure whether to drill a 6.5mm hole so the rollers still turn easily or drill a 6.3mm hole which would be tight?
Cheers guys


Hey Michael I don't have an answer but StewMac is legendary for putting excellent detail level specs on their web site. You can always do dummy installs on scrap too trying out the different hole sizes too.

Didn't want your post ignored and I also wanted to welcome you to the OLF!
Thanks very much for your help much appreciated!
Also thank you for taking the time to welcome me.
I will learn a lot from this site as I still have a lot to learn haha! Here are a couple of shots of my newest build,(second guitar) ancient kauri whitebait figure, sinker redwood top and ziricote fret board and bridge and snake wood binding and arm bevel to go with the Waverly tuning machines, I have also been lucky enough to get my hands on some Woolly mammoth bridge pins and saddle!
I drilled a 1/4 " hole for the tuners but it seems very tight!

Cheers
Attachment:
PXL_20220502_073048183.jpg
Attachment:
PXL_20220425_013143988.jpg
Attachment:
PXL_20220424_045212554.jpg
Image

Sent from my Pixel 4 using Tapatalk


You do not have the required permissions to view the files attached to this post.

These users thanked the author Mikeson1510 for the post: Hesh (Mon May 02, 2022 3:31 am)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 4 posts ] 

Board index » OLF Doc-U-build

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com